Abracs TCT 165mm Cordless Circular Saw Blade Triple Pack – Thin-Kerf Trade Blades for Cordless Saws

The Abracs TCT 165mm Cordless Circular Saw Blade Triple Pack provides a set of
professional tungsten carbide tipped (TCT) saw blades optimised for cordless circular saws.
Designed with a thin-kerf, low-friction body, these 165mm blades deliver faster cuts, reduced
battery drain and cleaner finishes in softwood, hardwood, C16/C24 structural timber and sheet materials.
Ideal for carpenters, roofers, shopfitters and general builders who want reliable, site-ready blades.

The Abracs TCT 165mm Cordless Circular Saw Blade Triple Pack is designed to meet the demands of
modern cordless circular saws used extensively on UK building sites and in workshops.
Each blade features a precision-ground steel body fitted with high-quality
tungsten carbide tips (TCT), delivering reliable cutting performance across a range of
common construction timbers and sheet materials.

The thin-kerf profile is specifically engineered to help reduce cutting resistance, meaning
the saw motor does less work per cut. This is especially important on 18V and 36V cordless saws,
where every reduction in friction can help to maximise run time per battery charge, while still
delivering a neat, controlled cut.

Suitable for cutting softwood framing (C16/C24), hardwood, plywood, OSB, chipboard and other common
timber-based materials used in domestic and light commercial construction, these Abracs blades are
an ideal choice for:

• First fix timber framing,
• Roofing and floor decking, and
• Second fix trimming and sheet material cutting.

Abracs blades are typically manufactured and tested in line with EN 847-1 (Safety requirements for
woodworking tools – circular saw blades) to support safe operation when used in accordance with
manufacturer and machine guidelines.

Typical Use Cases

• Timber framing & studwork – cross-cutting and sizing
  C16/C24 carcassing timber for internal partitions, walls and general framing.
• Roofing and decking – cutting rafters, joists, sarking boards, OSB and ply decking
  on pitched roofs and flat roofs.
• Flooring & subfloors – trimming and fitting chipboard flooring, plywood and OSB
  panels on timber joists.
• Shopfitting & joinery – sizing timber linings, shelves and board materials in
  retail, office and domestic fit-outs.
• General site carpentry – everyday cutting of studs, noggins, trims and sheet stock
  using cordless circular saws.

Installation & Application Tips

• Check compatibility:
  • Verify the blade diameter (165mm) and bore size match your cordless saw’s
    specifications (e.g. 20mm bore – always check your machine and blade label).
  • Ensure the maximum RPM rating of the blade meets or exceeds your saw’s no-load speed.
• Fitting the blade:
  • Disconnect the battery and lock the blade before removing the existing blade.
  • Clean the flanges and arbor so the new blade seats flat and true.
  • Install the new Abracs TCT blade with the arrow direction matching the saw’s rotation and
    tighten the arbor nut/bolt to the manufacturer’s torque recommendations.
• Cutting technique:
  • Set the depth so the blade just clears the workpiece by a few millimetres; this improves
    cut control and battery efficiency.
  • Allow the saw to reach full speed before entering the cut and maintain a
    steady, controlled feed rate – do not force the saw.
  • Support long workpieces adequately to prevent pinching or binding of the blade.
• Blade care:
  • Avoid cutting into hidden nails, screws or metal fixings which can chip or break TCT tips.
  • Keep blades clean from resin and pitch build-up – use a suitable blade cleaner
    to maintain cutting performance.
  • Replace or have blades professionally sharpened when you notice increased push force,
    burning or poor cut quality.
• Safety:
  • Always wear eye, ear and dust protection when using circular saws.
  • Use blades only on guards-intact, properly maintained saws and follow both tool
    and blade manufacturer’s safety instructions.

Technical & Performance Overview

Abracs TCT circular saw blades are designed and manufactured to meet the requirements of
EN 847-1 (Safety requirements for woodworking tools – circular saw blades) and Abracs’
internal quality standards. Exact specifications for tooth count and bore may vary by pack variant,
so always refer to the product label for precise details.

• Diameter: 165mm (suitable for popular cordless circular saws – check compatibility).
• Bore: Typically sized for common cordless saw arbors (e.g. 20mm) – confirm on the
  packaging and with your machine; reduction rings may be supplied for alternate bores.
• Tooth type: Tungsten Carbide Tipped (TCT), precision-ground for clean cutting
  in timber and sheet goods.
• Kerf: Thin-kerf design to reduce cutting resistance and improve cordless saw
  efficiency (exact kerf width shown on blade label).
• Suitable materials: Softwood, hardwood, C16/C24 structural timber, plywood, OSB,
  chipboard and general timber-based materials.
• Machine type: Cordless circular saws designed to accept 165mm blades; some
  corded saws may also be compatible (observe max speed and bore size).
• Max speed: Maximum RPM as per blade etching/label (must be equal to or greater than
  the saw’s no-load speed – verify before use).
• Standards: Produced in accordance with EN 847-1 and Abracs’ internal
  QC procedures for balance, run-out and tip bonding.
• Pack contents: Triple pack – 3 × 165mm TCT cordless circular saw blades.

Abracs TCT 165mm Cordless Circular Saw Blade Triple Pack Features & Customer Benefits

• Trade-ready triple pack
  Three blades in one pack mean you can rotate blades, keep a spare on the van or
  dedicate different blades to different materials while staying within budget.
• Optimised for C16/C24 timber and sheet goods
  Designed to cut structural softwood, roofing timbers and common sheet materials
  used throughout UK construction, helping to keep first and second fix work moving quickly.
• Improved cordless performance
  Thin-kerf reduces drag, allowing cordless saws to cut faster for longer per charge,
  supporting higher productivity on site.
• Durable carbide tips
  Abracs TCT tips offer extended life and consistent cut quality versus basic
  steel or low-grade blades, reducing blade change frequency and downtime.
• Versatile everyday cutting solution
  One blade format covers studs, joists, rafters, linings and sheet stock, simplifying
  blade selection for day-to-day work.

Frequently Asked Questions – Abracs TCT 165mm Cordless Circular Saw Blade Triple Pack

1. Will these 165mm Abracs TCT blades fit my cordless circular saw?

They are designed for 165mm cordless circular saws, a common size on many
professional platforms. To confirm compatibility:

• Check your saw’s maximum blade diameter (should state 165mm),
• Check the bore size required by your saw (e.g. 20mm), and
• Ensure the blade’s maximum RPM rating meets or exceeds your saw’s speed.

If these match, the blades should be suitable. If in doubt, consult your saw’s manual
or manufacturer.

2. Are these blades suitable for cutting C16/C24 structural timber?

Yes. These Abracs TCT blades are well suited to cutting C16 and C24 graded softwood
used in studwork, joists, rafters and general carcassing. Always ensure:

• You follow safe working practices (supports, bracing, PPE), and
• The blade remains sharp and undamaged to avoid overheating or kickback.

3. Can I use these blades on hardwood or just softwood?

The TCT tooth design is suitable for softwood and many hardwoods in thicknesses
appropriate to the saw and blade. However:

• Harder timber species will dull any blade faster; check cut quality and replace/
  sharpen blades as needed.
• Feed the saw at a moderate rate and avoid forcing the cut in dense hardwoods.

4. Are these blades okay for cutting sheet materials like ply, OSB and chipboard?

Yes. These 165mm Abracs TCT blades are suitable for cutting plywood, OSB, chipboard and
similar timber-based sheet materials. For the cleanest edges:

• Use sharp blades and support the sheet properly,
• Cut with the good face down on hand-held saws to minimise tear-out, and
• Consider using a guide rail or straightedge for long, accurate cuts.

5. How do I know when the blades need replacing or sharpening?

Signs a blade needs attention include:

• Increased push force required to feed the saw through the material,
• Burn marks on the timber or excessive heat build-up,
• Visible chipping or rounding of the carbide tips, or
• Poor cut quality – tear-out, splintering or rough edges compared to a new blade.

At this point, either replace the blade with another from the triple pack or have it
professionally sharpened if economically viable.

6. Common Uses & How to Use Abracs TCT 165mm Cordless Circular Saw Blades

Common Uses:

• Cutting studs, noggins and plates in timber frame and stud walls.
• Trimming roof timbers, rafters, purlins and sarking.
• Cutting flooring sheets (chipboard, OSB, ply) to size.
• Sizing door linings, window boards and general joinery stock.
• General on-site timber and board cutting with cordless circular saws.

How to Use – Step-by-Step:

1. Disconnect the saw from power/battery and lock the blade using the saw’s spindle lock.
2. Remove the existing blade, clean the arbor and flanges, and inspect the new Abracs blade for any damage.
3. Fit the new 165mm blade, ensuring the rotation arrow matches the saw, and tighten the arbor fixing to the manufacturer’s instructions.
4. Adjust the cutting depth and bevel angle as required for the job.
5. Mark and support the workpiece correctly; ensure offcuts can fall freely without trapping the blade.
6. Start the saw, allow it to reach full speed, then enter the cut smoothly, maintaining a steady feed rate.
7. Allow the blade to finish the cut fully before releasing the trigger and waiting for the blade to stop.
8. Store spare blades safely in a dry, protected location to avoid damage to the teeth and corrosion.