Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set – Range Expert

The Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set – Range Expert is a
professional‑grade drilling and chiselling kit designed for use with SDS Plus rotary hammer drills.
Combining a selection of high‑performance SDS Plus masonry drill bits with essential
SDS Plus chisels, this set is ideal for construction, refurbishment, electrical,
plumbing and general maintenance work in concrete, brick, block and masonry.

The Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set – Range Expert is a
carefully selected kit designed to cover the most common drilling and chiselling tasks
encountered on modern building sites. Each masonry drill bit features a durable
SDS Plus shank and a TCT carbide tip engineered to deliver:

• Fast drilling progress in concrete, brick, block and stone,
• Good wear resistance in abrasive substrates, and
• Improved centering and stability under hammer action.

The included SDS Plus chisels are manufactured from high‑grade alloy steel and heat treated
for toughness and impact resistance. They are ideal for light demolition, chasing and surface
removal in masonry and concrete, such as:

• Removing tiles and render,
• Chasing channels for cables and pipes,
• Breaking out small sections of brick or block, and
• General pointing, shaping and surface preparation.

Supplied in a durable storage case, this 15‑piece set keeps bits and chisels
organised and protected between jobs, making it an ideal addition to any
trade or serious DIY toolkit.

Typical Set Contents*

*Exact contents may vary by pack version – always check the product label for precise sizes.

• SDS Plus Masonry Drill Bits (typical sizes):
  • 4 x drill bits – e.g. 5 x 110 mm, 6 x 110 mm, 6 x 160 mm, 8 x 160 mm
  • 4 x drill bits – e.g. 8 x 210 mm, 10 x 160 mm, 10 x 210 mm, 12 x 210 mm
• SDS Plus Chisels (typical types & lengths):
  • 1 x Point chisel (e.g. 250 mm)
  • 1 x Flat chisel (e.g. 20 mm x 250 mm)
  • 1 x Wide/Scaling chisel (e.g. 40 mm x 250 mm)
• Storage: Robust blow‑moulded case for organised, portable storage.

Typical Use Cases

• Construction & civil work – drilling fixing holes for anchors and plugs in
  concrete, brick and block; light chiselling for opening recesses.
• Electrical installations – drilling cable and conduit holes, chasing channels in
  walls for services, breaking out back box recesses.
• Plumbing & heating – forming pipe penetrations and chases for hot & cold feeds,
  wastes and heating runs.
• Refurbishment & maintenance – removing old tiles, render, plaster and pointing,
  drilling fixings for replacement fittings and brackets.
• General masonry drilling – everyday plug and anchor holes for brackets, frames,
  battens and hardware in masonry substrates.

Usage & Application Tips

• Tool compatibility:
  • Designed for use with SDS Plus rotary hammer drills only (not SDS Max or standard
    three‑jaw chucks without an adaptor).
  • Ensure your drill is suitable for hammer drilling and chiselling in masonry, with
    a working safety clutch.
• Mode selection:
  • For drill bits: use rotary hammer (drill + hammer) mode for most concrete and masonry.
  • For chisels: use hammer‑only (chiselling) mode (no rotation) where your drill supports it.
• Drilling tips:
  • Mark hole positions accurately and check for hidden services with a cable/pipe detector.
  • Let the hammer action do the work; apply firm, steady pressure but do not force the drill.
  • Withdraw the bit periodically on deep holes to clear dust and reduce heat build‑up.
• Chiselling tips:
  • Choose the correct chisel (point, flat or scaling) for the task.
  • Work progressively, removing material in controlled sections rather than forcing large breaks.
  • Do not use chisels as pry bars; let the hammer action break the masonry.
• Safety:
  • Always wear appropriate PPE – eye protection, hearing protection, gloves and dust mask
    when required.
  • Ensure workpieces and ladders/platforms are stable and secure before drilling or chiselling.

Technical & Performance Overview

Abracs Range Expert masonry drilling and chiselling accessories are designed to meet the performance and
safety expectations of professional users. Drill bits and chisels are typically produced in line with
relevant EN standards for rotary percussion tools (e.g. principles from EN ISO 5468 / EN 60745
for hammer drilling accessories) and Abracs’ internal quality controls. Always consult the latest
Abracs technical data for definitive specifications.

• Shank type: SDS Plus – for SDS Plus rotary hammers only.
• Drill bit type: Tungsten Carbide Tipped (TCT) masonry drills, fluted for dust removal.
• Suitable substrates (drill bits): Concrete, brick, block, stone and general masonry.
• Chisel type: SDS Plus point, flat and scaling chisels (see contents for exact shapes/sizes).
• Suitable substrates (chisels): For light breaking, chasing and surface removal in
  concrete, render, plaster, brick and block.
• Machine type: SDS Plus rotary hammer drills with appropriate impact energy and a
  working safety clutch.
• Pack size: 15 pieces (combination of drill bits and chisels) in
  storage case.
• Usage: Professional construction, trade and heavy DIY applications.
• Storage: Keep clean and dry in the supplied case; apply a light oil film on shanks if
  stored for long periods to reduce corrosion.

Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set – Range Expert Features & Customer Benefits

• All‑in‑one SDS Plus solution
  A single kit covers the majority of everyday masonry drilling and chiselling tasks,
  reducing the need to buy and carry multiple loose accessories.
• Trusted Range Expert performance
  Part of Abracs’ Range Expert line, giving confidence in durability, speed and reliability
  for trade users.
• High‑quality carbide drill tips
  TCT heads provide fast drilling and long life in concrete and masonry compared with
  basic HSS or low‑grade bits.
• Versatile chisels for light demolition
  Included chisels allow you to chase, break out and remove surfaces without needing separate,
  dedicated tools.
• Organised storage for site use
  Supplied in a robust case that keeps bits and chisels together, protected and easy to transport
  between jobs and sites.

Frequently Asked Questions – Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set Range Expert

1. Will this set work with my SDS Plus drill?

Yes, all items in this set use the SDS Plus shank, which fits any standard
SDS Plus rotary hammer drill. It will not fit:

• SDS Max drills (larger shank), or
• Standard 3‑jaw chuck drills, unless you use an SDS Plus adaptor (drilling only, not chiselling).

2. Can I use these drill bits on reinforced concrete?

The TCT masonry drill bits are suitable for concrete and light reinforcement (e.g. small aggregates,
occasional light rebar contact). However:

• Repeated or heavy contact with rebar will significantly reduce bit life.
• For heavy or continuous rebar drilling, consider specialist rebar‑cutting or SDS drill bits
  designed for frequent steel contact.

3. Are the chisels suitable for heavy demolition work?

The chisels in this set are designed for light to medium chiselling tasks such as
chasing, tile removal, render and plaster removal, and small break‑outs. For heavy demolition
(e.g. breaking thick concrete slabs or structural elements), a heavier SDS Max breaker
and dedicated chisels is usually more appropriate.

4. Can I use the chisels in rotation mode?

No. When chiselling, your drill should be set to hammer‑only (chiselling) mode if available,
which disables rotation. Using chisels with rotation can:

• Reduce control,
• Cause premature tool wear, and
• Potentially damage the chisel or drill.

5. How should I maintain the drill bits and chisels?

To maximise life:

• Keep shanks and flutes clean after use.
• Store in the supplied case to protect edges and tips.
• Apply a light oil to shanks and bare metal if storing for a long time to reduce rust.
• Avoid using bits or chisels that show cracks, heavy wear or badly chipped tips – replace as necessary.

6. Common Uses & How to Use the Abracs 15 Pc SDS Plus Masonry Drill & Chisel Set

Common Uses:

• Drilling wall plug and anchor holes for fixings in concrete, brick and block.
• Chasing cable and pipe channels into walls.
• Removing tiles, render, plaster and old pointing.
• Forming recesses and penetrations for boxes and services.
• General construction and refurbishment drilling/chiselling tasks.

Kit Includes:
11 SDS Masonry Drills: 5.5 x 110mm, 6.0 x 110mm, 5.5 x 160mm, 6.0 x 160mm, 6.5 x 160mm, 7.0 x 160mm, 8.0 x 160mm, 10.0 x 160mm, 10.0 x 260mm, 12.0 x 260mm, 16.0 x 260mm
SDS Chisels: Flat Chisels 20.0 x 250mm, 40.0 x 250mm | Gouging Chisel 245mm | Point Chisel 250mm

How to Use – Step‑by‑Step:

1. Select the appropriate SDS Plus bit or chisel from the set for your task.
2. Insert it into your SDS Plus drill until it locks securely in place (you should feel it click into the chuck).
3. Set the drill to drill + hammer for masonry drilling or hammer‑only for chiselling.
4. Mark the work area and check for hidden pipes or cables before starting.
5. Hold the drill firmly with both hands, start at a low speed and then increase to a comfortable working speed.
6. For deep drilling, withdraw the bit periodically to clear dust; for chiselling, work progressively
   without forcing the tool.
7. After use, allow the bit or chisel to cool, clean off dust and store back in the case.