Tickitape PVC Electrical Insulation Tape

Tickitape PVC Electrical Insulation Tape is a high‑quality, self‑extinguishing PVC tape designed
for insulating, colour coding and bundling electrical cables and conductors. With good adhesion,
flexibility and dielectric strength, it is ideal for everyday electrical installation, repair
and maintenance work.

Tickitape PVC Electrical Insulation Tape is a professional‑grade PVC tape manufactured for
electrical work such as insulating terminations, joints and splices on low‑voltage cables,
as well as bundling and colour marking conductors and looms. Its flexible backing and good
stretch allow the tape to conform closely to cable shapes, providing a neat, secure wrap.

The pressure‑sensitive adhesive is formulated for strong tack on PVC cable sheathing and other
common substrates used in electrical installations. When applied correctly with suitable overlap
and tension, it provides a durable insulating layer and helps protect against moisture, abrasion
and mechanical wear in typical indoor environments.

Supplied in convenient rolls, Tickitape PVC Electrical Insulation Tape is a staple consumable
for electricians, maintenance engineers, panel builders, installers and DIY users working on
domestic, commercial and light industrial systems.

Typical Use Cases

• Insulating and over‑wrapping cable joints and terminations (low‑voltage).
• Colour coding phases, neutrals and earth conductors (follow local wiring colours).
• Bundling and lacing cable looms in panels, trunking and enclosures.
• Marking and identifying cables, flexes and harnesses.
• Minor repairs to outer PVC cable sheathing (where permitted by regulations).

Application & Usage Tips

• Prepare the surface: Ensure cables are clean, dry and free from dust, oil and grease before taping.
• Use firm tension: Stretch the tape slightly as you wrap, overlapping each turn by about half the tape width.
• Finish with pressure: Press down the final turn firmly to ensure good adhesion and sealing.
• Follow wiring regulations: Always comply with local electrical standards for insulation thickness and colour codes.
• Avoid high temperatures: Do not use near heat sources beyond the tape’s stated temperature rating.

Technical Information (Typical)

Exact specification can vary by product variant (width, colour, rating); always refer to the
Tickitape packaging or data sheet. Typical characteristics of Tickitape PVC Electrical Insulation
Tape include:

• Type: PVC electrical insulation tape, pressure‑sensitive adhesive.
• Backing: Soft, flexible PVC film.
• Adhesive: Pressure‑sensitive (e.g. rubber‑based) – designed for PVC cables (see spec).
• Width: Commonly 19mm (other widths may be available – confirm product size).
• Roll length: Typically around 20m (check packaging for exact length).
• Thickness: Approx. 0.13–0.18mm (varies by model – see data sheet).
• Operating temperature: Usually up to around 60–80°C (confirm specific rating).
• Electrical rating: Suitable for low‑voltage applications within stated dielectric strength (see spec).
• Flammability: Self‑extinguishing / flame retardant to relevant standard (where stated).
• Colours: Available in multiple colours (e.g. black, blue, brown, grey, green/yellow, red, white – confirm range).

For confirmed dielectric strength, temperature range, flammability class and approvals,
consult the official Tickitape technical documentation for the exact tape you are using.

Key Features

• Professional‑grade PVC insulation tape – for everyday electrical installation and maintenance.
• Good adhesion and flexibility – provides a secure, conformable wrap.
• Self‑extinguishing PVC* – formulated for electrical environments (*verify on product).
• Ideal for colour coding – multiple colours to match wiring schemes and ID requirements.
• Supplied in handy rolls – easy to keep in your toolkit or van.

Frequently Asked Questions (FAQs)

Common Uses / How to Use

To get the best from Tickitape PVC Electrical Insulation Tape:

1. Ensure the cable or joint is de‑energised and safe to work on.
2. Clean and dry the surface of the cable or conductor insulation.
3. Anchor the first wrap, then stretch the tape slightly and wind with 50% overlap.
4. Build up sufficient layers to achieve the desired insulation thickness.
5. Press down the final turn firmly to secure, and visually inspect the wrap for gaps or voids.