Tac Bac Carpet Protection Rolls

Tac Bac Carpet Protection Rolls are high‑performance, self‑adhesive
carpet protection films designed to safeguard fitted carpets from
dirt, dust, spills, paint and light site traffic during building, decorating,
refurbishment and maintenance work. Reverse‑wound for easy application, they provide a
secure, trip‑resistant barrier that stays in place while work is carried out,
then peels away cleanly after use when correctly applied.

Tac Bac Carpet Protection Rolls are specifically engineered as temporary protection for
fitted carpets in domestic and commercial environments. The product typically consists of:

• A strong polyethylene film which provides a protective barrier against soiling and spills, and
• A pressure‑sensitive adhesive that is designed to bond to carpet fibres, holding the film in place
  yet allowing clean removal after short‑term use.

The rolls are reverse‑wound so that when laid on the floor and pushed forward, the film unrolls
adhesive‑side down onto the carpet, making it easy for one person to cover large areas quickly.

Typical Use Cases

• Decorating & painting – protecting carpets from paint, filler, dust and splashes
  in occupied and empty properties.
• Building & refurbishment – shielding carpets in hallways, stairs, living areas and bedrooms
  while other trades work.
• Maintenance & service visits – protecting walk routes during boiler swaps, electrical upgrades,
  kitchen/bathroom works and general repairs.
• Office & commercial fit‑outs – temporary protection for carpet tiles and broadloom
  during furniture installation and snagging.
• Moving & events – guarding carpets during moves, open days, shows and high‑traffic events.

Suitable Carpet Types*

Designed for use on many fitted, synthetic fibre carpets, including:

• Most tufted and loop‑pile synthetic carpets (e.g. polypropylene, nylon) that are
  properly fixed to the floor,
• Commercial carpet tiles with durable, well‑bonded pile,
• Residential and commercial carpets with robust, stain‑resistant synthetic fibres.

Do NOT use on:

• Natural fibre carpets such as wool, sisal, seagrass, coir or jute,
• Rugs, loose‑laid mats or unsecured floor coverings,
• Carpets with very long/loose pile, heavily textured or delicate finishes,
• Any carpet where the manufacturer advises against the use of self‑adhesive protection films.

*Always carry out a test on a small, inconspicuous area to confirm suitability and clean removal before
full installation.

Application Instructions

1. Preparation
   • Vacuum the carpet thoroughly so it is clean, dry and free from loose dust, grit and debris.
   • Ensure the carpet is firmly fixed (stretched and gripped or properly adhered) and not loose.
2. Test area
   • Apply a small piece of Tac Bac to an inconspicuous area and leave for up to 24 hours.
   • Peel back and check for any damage, lifting of fibres, discolouration or adhesive transfer.
   • Only proceed with full coverage if the test area is satisfactory.
3. Applying the roll
   • Place the roll on the carpet at your starting point with the film edge aligned along the direction of travel.
   • Ensure the roll is oriented so that adhesive side contacts the carpet as you unroll.
   • Push/roll the Tac Bac forward, pressing it firmly onto the carpet as you go, smoothing out bubbles and wrinkles.
4. Joints & coverage
   • For wide areas, lay additional strips with a small overlap or neatly butted edges.
   • If required, secure overlaps or edges with suitable low‑tack tape to minimise trip hazards.
5. During use
   • Inspect regularly for tears, lifting edges or heavy contamination.
   • Cut out and replace sections that are badly damaged or heavily soiled.
6. Removal
   • Within the recommended maximum dwell time, slowly peel Tac Bac back from the carpet
     at a low angle.
   • Take care not to jerk or pull vertically, which may stress the carpet fibres.
   • Dispose of used film according to site waste procedures.

Technical & Product Overview

Exact specification (film thickness, adhesive strength, roll width/length) may vary depending on the Tac Bac
Carpet Protection product variant. Always check the individual roll label and technical datasheet
for definitive details.

• Brand: Tac Bac
• Product type: Self‑adhesive carpet protection film on a reverse‑wound roll.
• Substrate: Fitted synthetic carpets and certain commercial carpet tiles
  (subject to testing and manufacturer approval).
• Roll format: Common widths such as 600mm, 800mm or 1m and lengths such as
  25m, 50m or 100m (check product listing for exact dimensions).
• Material: Tough polyethylene (PE) film with pressure‑sensitive adhesive backing.
• Colour: Typically clear or lightly tinted to allow inspection of the carpet beneath.
• Adhesive: Formulated for temporary adhesion to synthetic carpet fibres and
  clean removal when used correctly and within recommended time.
• Recommended usage duration: Short‑term protection only
  (e.g. up to several days or a few weeks depending on product; confirm maximum dwell time on datasheet).
• Storage: Store rolls upright in a cool, dry environment, away from direct sunlight,
  heat sources and chemicals.

Best Practice & Limitations

• Natural fibre carpets:
  • Avoid using on wool, sisal, seagrass, coir, jute and other natural fibre carpets as
    adhesive films may cause discolouration, fibre damage or leave residue.
• Moisture & humidity:
  • Ensure carpets are dry before applying Tac Bac.
  • Avoid prolonged use in very damp or high‑humidity conditions which may affect adhesion
    and carpet backing.
• Heat & sunlight:
  • In strong direct sunlight or high temperatures, do not exceed the manufacturer’s recommended dwell time
    due to increased risk of adhesive transfer.
• Heavy loads & sharp objects:
  • Tac Bac helps protect against everyday traffic and light impact, but it cannot prevent
    all damage from sharp tools, heavy point loads or dragging rough objects.
  • Use additional protection (e.g. boards) under heavy equipment, ladders or sharp‑edged items.

Tac Bac Carpet Protection Rolls Features & Customer Benefits

• Significantly reduces post‑job cleaning
  Protects carpets from dust, dirt and paint, saving time and cost at the end of
  a project and improving client satisfaction.
• Quick to install and remove
  Reverse‑wound, self‑adhesive format allows one‑person application and straightforward removal,
  ideal for busy trades and maintenance teams.
• Safer than loose coverings
  Adheres directly to carpet to create a fixed, non‑wrinkling surface, helping to reduce
  trip hazards associated with dust sheets.
• Professional appearance
  Demonstrates care for the client’s property and provides a tidy, professional‑looking work environment.
• Versatile for residential & commercial use
  Suitable for homes, offices, hotels, retail, show homes and rental properties during works.

Frequently Asked Questions – Tac Bac Carpet Protection Rolls

1. Can I use Tac Bac on wool carpets?

It is not recommended for wool or other natural fibre carpets. The adhesive may
discolour, distort or damage natural fibres or leave residue. Always check carpet manufacturer
guidance and test thoroughly on synthetic carpets only.

2. How long can I safely leave the film down?

Tac Bac is designed for short‑term, temporary protection. Maximum dwell time depends on:

• The specific Tac Bac variant,
• Carpet type,
• Temperature, sunlight exposure and humidity.

Always follow the manufacturer’s recommended maximum time (often days to a few weeks) and
avoid exceeding it to minimise the risk of adhesive transfer or marking.

3. Will Tac Bac damage the carpet when removed?

When:

• Used on suitable synthetic carpets,
• Applied to a clean, dry, firmly fixed surface,
• Removed within the recommended timeframe,

Tac Bac is designed to be removed cleanly. However, because carpet constructions and conditions vary,
a test area is always essential.

4. Is it reusable?

No. Tac Bac Carpet Protection Rolls are single‑use products. Once removed, the film will be
contaminated with dust and debris and should not be re‑applied. Always use fresh film
for each protection phase.

5. Can I use Tac Bac on stairs?

Yes, on suitable fitted synthetic carpeted stairs, taking extra care to:

• Apply the film smoothly with no loose or raised edges,
• Ensure treads and risers are fully covered and the film is firmly adhered,
• Inspect frequently for lifting edges or tears, and repair/replace as needed.

6. Common Uses & How to Use Tac Bac Carpet Protection Rolls Effectively

Common Uses:

• Protecting carpets during painting, decorating and re‑plastering.
• Covering hallways and landings during boiler changes or bathroom/kitchen refits.
• Shielding carpets in offices and commercial units during fit‑out and snagging.
• Short‑term protection for show homes and rental properties during viewings and move‑ins.

How to Use – Quick Guide:

1. Vacuum carpets thoroughly; ensure they’re clean, dry and well fixed.
2. Test Tac Bac on a small hidden area for up to 24 hours.
3. Starting at a doorway or edge, unroll Tac Bac adhesive‑side down, pressing firmly into the pile.
4. Overlap or butt joints neatly; secure edges if necessary to avoid trip points.
5. Inspect regularly and replace damaged or heavily soiled sections.
6. Within the recommended time, peel back slowly at a low angle and dispose of the used film.