Everbuild Stick2 Contact Adhesive – High Strength Multi-Purpose Bonding

Everbuild Stick2 Contact Adhesive is a high strength, fast‑bonding contact adhesive designed for permanent bonding of a wide range of materials, including laminates, wood, metals, rubber, leather, cork and many plastics. Ideal for shopfitting, joinery, flooring, kitchen worktops, DIY repairs and general construction use where an instant grab, long‑lasting bond is required.

Everbuild Stick2 Contact Adhesive is a professional‑grade, solvent‑based contact adhesive formulated to give high initial grab and excellent final bond strength. It is ideal for bonding a broad range of porous and non‑porous substrates where traditional PVA or grab adhesives may not be suitable, particularly for thin materials that cannot be clamped easily.

The adhesive is specially designed for double‑sided contact bonding. Once applied to both surfaces and allowed to dry until touch‑dry, the adhesive forms a powerful bond as soon as the two surfaces are brought together under firm pressure. This is particularly valuable in shopfitting, kitchen and bathroom installation, furniture manufacture, joinery and interior finishing, where an instant, non‑slip bond saves time and improves accuracy.

Typical applications for Everbuild Stick2 Contact Adhesive include bonding decorative laminates to chipboard or MDF for worktops, counters and cabinets, fixing plastic or metal trims, bonding rubber flooring or skirting, attaching cork tiles, and repairing leather or rubber components. Its strong, flexible bond handles minor movement between dissimilar materials and resists the everyday knocks and vibration found in domestic and commercial environments.

The adhesive is supplied ready to use and can be applied with a brush, spreader or roller, depending on the scale of the job. Once cured, it provides a long‑lasting, heat‑resistant bond suitable for typical indoor environments. Always follow the instructions on the tin for coverage rates, drying times and safety guidance, especially when working in confined or poorly ventilated areas.

Typical Use Cases

• Bonding decorative laminates to kitchen worktops, shop counters and bar tops.
• Fixing plastic edgings, trims and upstands to MDF, plywood or chipboard.
• Attaching rubber or cork flooring, stair treads and skirting to suitable surfaces.
• Bonding metal sheets to timber or other rigid substrates for panels and protective linings.
• Repairing or bonding leather, rubber and some plastics in workshop or domestic settings.

Installation & Application Tips

1. Surface preparation: Ensure all surfaces are clean, dry and free from dust, grease, oil, loose paint or contamination. Lightly abrade glossy or very smooth surfaces to improve key and wipe clean.
2. Check compatibility: Always carry out a small test area on plastics, rubber or painted surfaces to check for any adverse reaction or staining.
3. Application: Stir the adhesive well if required. Apply an even, thin coat to both surfaces using a brush, roller or spreader. Avoid puddling or excessively thick application.
4. Open time / tack time: Allow the adhesive to flash off until it is touch‑dry but still tacky. This will vary depending on temperature, humidity and substrate, but is typically a few minutes. Follow the drying time guidance on the product label.
5. Bonding: Carefully align the two coated surfaces – repositioning is very limited once contact is made. Bring them together and apply firm, even pressure over the entire area (use a roller where possible) to ensure full contact and maximum bond strength.
6. Curing: The bond is instant on contact for handling, but full cure and ultimate strength develop over several hours. Avoid heavy loading or stressing the joint until the adhesive has fully cured.
7. Clean‑up: Wipe away fresh excess adhesive immediately with a suitable solvent as recommended on the tin. Once cured, removal will be mechanical only.

Always read and follow the manufacturer’s safety data sheet (SDS) and technical data sheet (TDS). Ensure good ventilation, avoid naked flames and use appropriate PPE when working with solvent‑based contact adhesives.

Everbuild Stick2 Contact Adhesive Features

• High strength contact bond – designed to deliver excellent initial grab and long‑term adhesion for demanding interior applications.
• Multi‑purpose formulation – suitable for laminates, timber, MDF, metals, rubber, cork, leather and many rigid plastics (always test first).
• Solvent‑based system – quick drying with a short open time to speed up fitting and reduce downtime.
• Double‑sided application – apply to both surfaces for maximum bond strength and instant grab.
• Versatile in trade and DIY settings – ideal for shopfitting, joinery, furniture making, flooring, kitchen and bathroom installs.
• Good heat and ageing resistance – suitable for typical internal environments where temperature fluctuations occur.
• Professional, consistent finish – flows and spreads well to give a uniform film and reliable bond line.

Technical Information

• Type: Solvent‑based, high strength contact adhesive.
• Application: Brush, spreader or roller to both bonding surfaces.
• Substrates: Laminates, timber, MDF, plywood, chipboard, metals, rubber, cork, leather and certain plastics (test first).
• Bond type: Instant contact bond – limited repositioning after contact.
• Typical use: Interior bonding, laminates and edgings, flooring accessories, trims, panels and general construction / DIY repairs.
• Standards & quality: Manufactured under controlled quality procedures to ensure consistent performance. Refer to the official Everbuild technical data sheet for detailed performance figures and any specific compliance information.

Technical performance (shear strength, peel strength, temperature resistance, coverage rate, etc.) should be taken from the product’s latest technical data sheet supplied by Everbuild / Sika to ensure compliance with project specifications and building regulations.

Frequently Asked Questions – Everbuild Stick2 Contact Adhesive

1. What materials can I bond with Everbuild Stick2 Contact Adhesive?

Everbuild Stick2 Contact Adhesive is designed to bond a wide variety of materials including decorative laminates, timber, MDF, chipboard, metals, rubber, cork, leather and many rigid plastics. Always clean surfaces thoroughly and carry out a small test area on plastics, paints or sensitive finishes to ensure compatibility and avoid staining.

2. Can I use Everbuild Stick2 Contact Adhesive for kitchen worktops and laminates?

Yes. This adhesive is commonly used for bonding decorative laminates to chipboard or MDF worktops, as well as for shop counters, bar tops and cabinets. Because it is a contact adhesive, it offers instant grab, which helps prevent laminate movement during bonding. Always follow the recommended open times and apply firm, even pressure with a roller to achieve a full, bubble‑free bond.

3. Is Everbuild Stick2 Contact Adhesive suitable for fixing skirting boards to plaster?

While Stick2 Contact Adhesive can bond timber and some rigid plastics, it is usually not the first choice for fixing skirting boards directly to plaster. A grab adhesive or a suitable construction adhesive is generally better for this type of job, as it allows more working time and some repositioning. Stick2 is ideal where you need an instant, non‑slip bond on both surfaces, such as laminates and trims, rather than large, uneven plaster surfaces.

4. Can I reposition parts after bonding with Stick2 Contact Adhesive?

No – or only very minimally. Once both surfaces have been coated, allowed to become touch‑dry and then pressed together, the bond is instant and permanent. There is virtually no opportunity to slide or reposition the materials. For applications where alignment is critical, mark out carefully first, use temporary guides or supports, and consider an adhesive with a longer open time if you need adjustability.

5. Is Everbuild Stick2 Contact Adhesive suitable for exterior use?

Stick2 Contact Adhesive is primarily designed for interior applications. While it offers good bond strength and heat resistance for most indoor environments, long‑term exposure to moisture, UV and weathering can affect performance. For external or high‑moisture applications, use an adhesive specifically rated for outdoor use and check the manufacturer’s data sheets for suitability.

Common Uses / How to Use

Common Uses

• Bonding decorative laminates to kitchen worktops, cabinet doors and shelving.
• Attaching plastic or metal trims, edging strips and upstands in kitchens, bathrooms and shopfitting projects.
• Fixing cork tiles, rubber mats and stair treads to suitable rigid substrates.
• Bonding thin metal sheet to timber or board for protective linings and decorative panels.
• General workshop, automotive and domestic repairs involving leather, rubber and certain plastics (test first).

How to Use – Step‑by‑Step Summary

1. Prepare surfaces: Clean thoroughly and lightly abrade smooth or glossy areas. Ensure surfaces are dry and sound.
2. Stir and apply: Stir if required, then apply an even coat to both surfaces using a brush, spreader or roller.
3. Allow to dry to tack: Let the adhesive flash off until touch‑dry but still tacky as recommended on the product label.
4. Align carefully: Check all measurements and dry‑fit components, as repositioning is extremely limited once contact is made.
5. Bond the surfaces: Bring the two coated surfaces together and press firmly, working from one end to the other to avoid trapping air.
6. Apply pressure: Use a roller or block to apply firm, even pressure across the entire bonded area.
7. Allow to cure: Leave the assembly undisturbed for the recommended curing time before applying heavy loads or machining.