-
£5.83£7 – £7.68£9.22Price range: £5.83£7 through £7.68£9.22 Excl. VATIncl. VAT
- One-step installation โ gash point pierces the metal sheet and bites into timber below, often without preโdrilling (check thickness and spec).
- Secure sheet-to-timber connection โ deep, coarse wood thread gives high pullโout resistance in timber purlins and battens.
- Weatherโtight seal โ bonded EPDM washer compresses under the head to seal the fixing point against water ingress.
- Fast, easy driving โ hex washer head for high torque transfer with standard hex sockets on drill/drivers.
- Corrosionโprotected โ coated / plated finish (e.g. zinc or organic) for external roofing and cladding environments (check specific Ferrotek spec).
-
£3.99£4.79 – £6.64£7.97Price range: £3.99£4.79 through £6.64£7.97 Excl. VATIncl. VAT
- Built for heavy section steel โ engineered for thick / structural steel connections (within rated capacity).
- Selfโdrilling tip โ drills and taps in one operation, saving time and labour on site.
- High pullโout & shear performance โ heavyโduty shank and thread for structuralโgrade fixings.
- Hex head drive โ positive drive and high torque transfer for demanding applications.
- Corrosionโresistant finish* โ suitable for exposed applications where a protective coating is required (*check specific class).
-
£6.64£7.97 – £10.09£12.11Price range: £6.64£7.97 through £10.09£12.11 Excl. VATIncl. VAT
- Heavyโsection drilling capacity โ engineered drill point for thicker steel sections than lightโduty tek screws (check data for exact capacity).
- Builtโin weather seal โ bonded EPDM washer provides a durable, flexible seal between fixture and steel for roofing and cladding applications.
- Oneโstep fixing โ drills, taps, clamps and seals in a single operation, with no preโdrilling required within rated thickness.
- High pullโout & clamp strength โ designed for loadโbearing steelโtoโsteel fixings in structural and envelope systems.
- Corrosionโprotected finish โ typically highโperformance zinc or organic coating for extended service life (check specific product spec).
-
£2.64£3.17 – £7.84£9.41Price range: £2.64£3.17 through £7.84£9.41 Excl. VATIncl. VAT
- No preโdrilling required โ integrated selfโdrilling (tek) point drills its own hole into light gauge steel sections.
- Fast installation โ drill, tap and fix in one step, saving time on repetitive steelโtoโsteel connections.
- Reliable steelโtoโsteel performance โ engineered for light section steel such as purlins, channels, studs and tray.
- Consistent clamping โ sharp threads give secure, vibrationโresistant fixing when installed correctly.
- Corrosionโprotected finish โ typically zincโplated or equivalent for indoor and sheltered applications (check product spec).
-
£5.20£6.24 – £7.60£9.12Price range: £5.20£6.24 through £7.60£9.12 Excl. VATIncl. VAT
- Optimised for light section steel โ designed for thin gauge steel sheets, purlins and light framing.
- Selfโdrilling tip โ drills and taps through light steel in one step, no preโdrilling in most cases.
- Hex washer head โ positive drive and good clamping surface onto sheeting.
- EPDM sealing washer โ provides a durable, weatherโtight seal at the fixing point.
- Corrosionโresistant coating* โ suitable for external building envelopes (*check specific corrosion class).
-
£5.83£6.99 Original price was: £5.83£6.99.£5.50£6.60Current price is: £5.50£6.60. Excl. VATIncl. VAT
- Purposeโmade stitching screw โ ideal for side laps, sheet joints, trims and flashings.
- Selfโdrilling tip โ drills and taps through thin steel sheets in one operation, no preโdrilling in most cases.
- Hex head drive โ positive drive with standard hex socket for quick installation.
- EPDM sealing washer โ provides a durable weather seal around the fixing for roofing and cladding.
- Corrosionโresistant finish* โ suitable for external building envelope use (*check specific coating class).
End of content
End of content
