The wedge (tapered) profile makes them particularly useful where small, accurate adjustments are needed. By sliding one or more wedges together, installers can fine‑tune the height or level of:

• uPVC, timber and aluminium window frames
• Door frames and linings
• Kitchen carcasses and worktop supports
• Battens, studs and sole plates
• Flooring and decking bearers

Manufactured from robust plastic, these packers provide stable, long‑term support and will not absorb moisture, rot or rust like timber offcuts or improvised shims. Their compact 24mm width x 60mm length makes them easy to position in tight areas around fixings while still giving a solid bearing surface.

Supplied in a bulk box of 1000, they are ideal for window fitters, carpenters, kitchen installers, partitioning contractors and general builders who need a consistent, reliable packing solution across many installations.

Typical Applications & Use Cases

• Window & door installation
  Packing and levelling frames, sills and thresholds to ensure correct alignment and operation before fixing and sealing.
• Kitchen & bedroom fitting
  Adjusting and supporting cabinet carcasses, plinths and worktops for a level, professional finish.
• Studwork & partitioning
  Packing studs, head and sole plates to take out irregularities in floors, ceilings and walls.
• Flooring & decking
  Levelling joists, battens and bearers on uneven substrates.
• General construction & maintenance
  Any job that requires reliable, small height adjustments or packing under components, fixings or equipment.

Usage Guidance

How to Use Plastic Wedge Packers

1. Position the wedge
   Place one or more wedge packers beneath or behind the component that needs levelling or packing.
2. Adjust the height
   Slide the wedge(s) further in or out to fine‑tune the gap until the frame or component is level, plumb and correctly aligned.
3. Check alignment
   Use a spirit level, square or laser to verify that the item is correctly positioned.
4. Secure the fixing
   Once satisfied, fix the component in place using appropriate screws, anchors or brackets, ensuring the packers remain in position.
5. Trim if necessary
   If any wedge protrudes beyond the visible edge, it can be trimmed back with a knife (where safe and appropriate).

Best Practice Tips

• Distribute packers to support the load evenly rather than relying on a single point.
• Avoid over‑packing; ensure the wedge sits firmly and fully supported on the substrate.
• Use in conjunction with flat packers or shims where a combination of coarse and fine adjustment is required.
• Always follow relevant installation guidelines for windows, doors and structural elements.

Key Features & Advantages

• Wedge / Tapered Profile
  Feature: Gradually increasing thickness along the length of the packer.
  Benefit: Enables fine, controlled adjustment and tight packing in small gaps.
• 24mm x 60mm Footprint
  Feature: Compact but supportive size.
  Benefit: Fits easily around frame fixings, brackets and tight spaces while still providing a stable bearing surface.
• High‑Strength Plastic
  Feature: Tough, non‑absorbent material.
  Benefit: Will not split, rot or corrode like improvised timber shims; maintains thickness over time.
• Bulk Pack of 1000
  Feature: High quantity per box.
  Benefit: Cost‑effective for frequent use on site, reducing the need for constant re‑ordering.
• Multi‑Trade Use
  Feature: Suitable for glazing, carpentry, joinery and general building.
  Benefit: One versatile product that covers numerous packing and levelling tasks.

Technical Information

• Product Type: Plastic wedge packers / tapered shims
• Dimensions: 24mm (approx. width) x 60mm (approx. length)
• Thickness: Tapered wedge profile (exact range variant‑dependent)
• Material: Durable plastic
• Pack Quantity: 1000 pieces
• Colour: Typically assorted or trade colour (may vary by batch/variant)
• Primary Uses: Packing and levelling frames, joinery, studwork, flooring and general construction items
• Environment: Indoor and outdoor use (as part of appropriate installation system)

Plastic Wedge Packers 24mm x 60mm Frequently Asked Questions

1. What are plastic wedge packers used for?

They are used for packing, levelling and aligning items such as window and door frames, kitchen units, battens and joists. The wedge shape allows small, precise height adjustments.

2. Can these be used on uPVC window and door installations?

Yes. Wedge packers are widely used by installers to level and support uPVC frames within openings before fixing and sealing, often in combination with flat packers.

3. Are plastic wedge packers load‑bearing?

They are designed to provide support under typical frame and fitting loads when used correctly and on a sound substrate. For structural applications, always follow the relevant product and installation guidelines.

4. Can I cut or trim the wedges?

Yes. If a wedge protrudes beyond the visible edge, it can usually be trimmed carefully with a suitable knife. Take normal safety precautions when cutting.

5. Are they reusable?

Where removed undamaged, they can be reused. However, on most professional installations they tend to be left in place as part of the permanent packing system.