Nylon Plasterboard Fixings

Nylon Plasterboard Fixings are high‑strength cavity anchors designed specifically for securing
light to medium loads into plasterboard (drywall) without the need for timber studs or masonry.
Made from tough nylon, these fixings provide a reliable, corrosion‑resistant solution for mounting
shelves, brackets, bathroom accessories, curtain rails and other fixtures to hollow walls.

Nylon Plasterboard Fixings are designed to overcome the limitations of standard wall plugs when
working with hollow wall constructions. Instead of relying on solid masonry, these fixings expand,
knot, screw or toggle behind the plasterboard to create a secure anchor point within the cavity.

Manufactured from high‑quality nylon, they offer excellent resistance to corrosion, ageing and
temperature variation, and will not rust like metal fixings. Depending on the type, the fixing
may feature a self‑drill tip, expanding body or knotting design, all intended to spread load over
a larger area of the board and reduce the risk of pull‑out.

Suitable for use with standard plasterboard thicknesses (typically 9.5–12.5mm – check spec), Nylon
Plasterboard Fixings are commonly supplied with compatible screws and are suitable for most indoor
residential and light commercial applications where loads and safety factors fall within the
manufacturer’s stated limits.

Typical Use Cases

• Fixing lightweight shelves and small wall‑mounted units to plasterboard walls.
• Mounting bathroom accessories such as towel rails, toilet roll holders and robe hooks.
• Hanging pictures, mirrors (within weight limits), hooks and coat racks.
• Securing curtain rails, blind brackets and lightweight poles to drywall.
• Installing electrical accessories, trunking clips, and small brackets on partition walls.

Installation & Usage Tips

• Choose the correct fixing type: Select a nylon fixing suitable for hollow plasterboard and rated for the load you intend to support.
• Check board thickness: Ensure the fixing is compatible with your plasterboard thickness and cavity depth.
• Drill the right size hole: If not self‑drilling, use the drill bit size recommended by the manufacturer for a snug fit.
• Avoid over‑tightening: Tighten the screw until the fixing sets and grips firmly; over‑tightening can crush the board.
• Use multiple fixings for heavier items: Spread the load using several fixings and, where possible, incorporate studs or battens for additional support.
• Follow load guidance: Do not exceed the stated maximum load per fixing; consider safety factors and use more robust fixings for heavy items.

Technical Information (Typical)

Specifications vary by type and manufacturer; always refer to the packaging or data sheet for the
exact Nylon Plasterboard Fixings you are using. Typical characteristics include:

• Type: Nylon cavity fixing for plasterboard / drywall.
• Material: High‑strength nylon, non‑corrosive and non‑conductive.
• Suitable substrates: Standard plasterboard, hollow partition walls and some lightweight cavity panels.
• Board thickness: Typically suitable for ~9.5–12.5mm plasterboard (check specific range).
• Installation: Pre‑drilled or self‑drill depending on design; set using a screwdriver (or setting tool if specified).
• Load capacity: Light to medium‑duty (e.g. often in the 5–20kg range per fixing under ideal conditions – always check manufacturer data).
• Screw compatibility: Usually supplied with matching screws (e.g. 4.0mm or 4.5mm); if not, follow size guidance.
• Pack sizes: Available in small DIY blister packs and larger trade packs – confirm quantity on pack.

Always test on a sample area if you are unsure of board condition or thickness, and follow any local
building regulations or guidance when fixing heavy or safety‑critical items.

Key Features

• Engineered for hollow walls – performs where standard wall plugs fail in plasterboard.
• Tough nylon construction – resists corrosion and environmental ageing.
• Simple fixing method – quick installation with basic hand tools.
• Clean, professional finish – allows fixtures to sit flush against the wall.
• Versatile applications – suitable for many domestic and light commercial fittings.

Frequently Asked Questions (FAQs)

Common Uses / How to Use

To get the best from Nylon Plasterboard Fixings:

1. Check the wall for hidden services (cables/pipes) before drilling.
2. Mark the fixing positions and, if required, drill the recommended pilot hole size.
3. Insert or screw in the nylon plasterboard fixing until it is flush with the wall surface.
4. Align your bracket or fitting and insert the screw through it into the fixing.
5. Tighten the screw until the fixing sets firmly behind the board and the fitting is secure.
6. Use multiple fixings and, where possible, studs/battens for heavier or critical installations.