• Emulsion-painted walls and ceilings
• Previously painted or primed woodwork (doors, frames, skirting boards, architraves)
• Varnished or sealed timber
• Glass and glazed panels
• Metal, uPVC frames and radiators (cool and clean)
• Tiles and other smooth, sealed surfaces

This decorating tape is particularly effective when creating feature walls, stripes, geometric patterns and contrasting colour borders. Because it helps prevent paint bleed, you spend less time cutting in with a brush and less time correcting mistakes after removing the tape.

Typical Sizes & Specifications

• Widths (approx.): 24 mm, 36 mm, 48 mm
• Roll length (approx.): 41.1 m (may vary by variant)
• Adhesive type: Medium tack, pressure-sensitive
• Best for: Most cured interior paints (emulsion, acrylic, latex) and sealed surfaces
• Clean removal: Up to 21 days indoors when applied to sound, fully cured paint
• Recommended paint types: Water-based paints (emulsion, acrylic, latex). Suitable for most solvent-based paints when surfaces are fully cured & sound.

For freshly painted surfaces, ensure the paint is fully cured according to the manufacturer’s guidance (often a minimum of 7 days) before applying FrogTape. This helps avoid lifting or marking the new paint when the tape is removed.

Typical Use Cases

• Skirting boards & architraves: Mask where walls meet skirting boards for a neat edge and to prevent wall colour running onto woodwork.
• Ceiling lines: Achieve a sharp line where coloured walls meet white ceilings.
• Door & window frames: Protect frames while painting surrounding walls, or mask walls while painting woodwork.
• Feature walls & stripes: Create crisp geometric patterns, stripes, colour blocks and feature areas.
• Repairs & touch-ups: Mask around small repair areas to keep fresh paint within a defined zone.

Installation & Application Tips

1. Prepare the surface: Ensure surfaces are clean, dry, dust-free and free from grease or loose/flaking paint. Wipe down with a clean, dry cloth if necessary.
2. Measure & apply: Unroll the FrogTape and apply in a straight line, pressing gently into place along the required edge.
3. Seal the edge: Run a clean thumb or plastic smoother firmly along the tape edge to ensure full contact with the surface. This helps maximise PaintBlock® performance.
4. Paint as normal: Apply paint using a brush or roller, slightly overlapping the tape edge. Avoid overloading with excessive paint, which may cause pooling.
5. Remove at the right time: For best results, remove FrogTape before the paint is fully dry (when it is touch-dry but not fully hardened). Pull the tape slowly and steadily back on itself at a 45° angle.

Note: Always test on a small, inconspicuous area first, especially on delicate or specialty finishes. Not recommended for uncured or weak surfaces (e.g. poor quality matt paint that easily chalks or rubs off).

Key Features & Customer Benefits

• PaintBlock® Technology: Creates a micro-barrier along the tape edge to help stop paint bleed, delivering sharp, professional-looking paint lines.
• Medium-tack adhesive: Offers a secure hold during painting while still removing cleanly from most properly prepared surfaces.
• Multi-surface performance: Designed for painted walls, wood, glass, metal and more, reducing the need for multiple different tapes.
• Long open time: Can stay in place indoors for up to 21 days without leaving sticky residue on most surfaces.
• Easy to tear by hand: No scissors required, allowing quick adjustments and fast masking around corners and edges.
• Highly visible colour: The distinctive green tape is easy to see against most surfaces, helping you spot gaps or overlaps in your masking.

Frequently Asked Questions about FrogTape® Multi-Surface

1. What is the difference between FrogTape® and standard masking tape?

FrogTape® Multi-Surface uses a patented PaintBlock® Technology that standard masking tape does not have. When used with water-based paints, this technology forms a barrier along the edge of the tape to help stop paint bleed. Standard masking tape often allows paint to seep underneath, leading to fuzzy lines and extra touch-up work. FrogTape is specifically designed to provide crisp, clean paint lines and more reliable removal when used as directed.

2. Can I use FrogTape® on freshly painted walls?

FrogTape should only be applied to fully cured paint. Even if paint feels dry to the touch, it may not be fully cured underneath. As a general guide, wait at least 7 days, and always follow the paint manufacturer’s recommended curing time. Applying masking tape too early can cause the new paint to lift or mark when the tape is removed.

3. Is FrogTape® suitable for skirting boards and delicate woodwork?

Yes, FrogTape is commonly used for skirting boards, door frames, architraves and window frames. Ensure the woodwork is clean, dry and well-bonded (e.g. good quality gloss, satin or eggshell). Press the tape down firmly along the edge to seal, and remove carefully at a 45° angle. On delicate or old finishes, always test on a small area first.

4. Can I use FrogTape® outdoors?

FrogTape Multi-Surface is primarily designed for indoor use. Limited, short-term outdoor use may be possible in dry conditions, but performance can be affected by moisture, UV exposure and temperature changes. For long-term exterior projects, consider tapes specifically designed for exterior applications and always check the manufacturer’s recommendations.

5. How do I stop FrogTape® from peeling off paint when I remove it?

To minimise the risk of paint lifting:

• Only apply FrogTape to sound, fully cured paint and surfaces.
• Do not exceed the recommended 21-day indoor removal time.
• Remove the tape while the final coat is still slightly tacky, not rock-hard dry.
• Pull the tape back slowly on itself at a 45° angle, rather than straight up from the surface.
• On delicate surfaces, score gently along the tape edge with a sharp knife before removal to break any paint film bridge.

Common Uses & How to Use FrogTape® Effectively

Common Uses

• Masking along skirting boards when painting walls.
• Creating sharp lines between walls and ceilings.
• Protecting door and window frames during wall painting.
• Designing feature walls, stripes and patterns.
• Masking edges around built-in furniture, radiators, sockets and switches.

How to Use – Step-by-Step

1. Plan your layout: Mark any pattern lines lightly with a pencil and a spirit level if creating stripes or geometric designs.
2. Apply FrogTape: Run the tape carefully along the marked line or edge, pressing firmly along the entire length, especially at corners and joins.
3. Seal the edge: Smooth the tape edge with your thumb, a plastic card or a wallpaper smoother to ensure maximum contact.
4. Paint: Apply paint as normal, working away from the tape edge where possible to avoid forcing paint under the tape.
5. Remove: When the paint is touch-dry, gently peel the tape back on itself at a 45° angle. Do not rush, especially around corners and intricate areas.

Follow these steps and you’ll achieve crisp, clean paint lines with minimal touch-up work, saving time and giving a more professional-looking finish to your decorating projects.