Key Benefits

• Heavy duty carbide construction
  Tough carbide cutting edges provide excellent edge retention and durability compared with standard HSS blades.
• Reversible double‑sided blades
  Each blade has two usable cutting edges – simply flip when one side becomes dull to effectively double blade life.
• Clean, accurate planing performance
  Precision‑ground edges give smooth finishes and accurate material removal on timber and sheet materials.
• Standard 82mm size
  Designed for DeWalt 82mm planers and compatible with many other brands using the same blade type (always check your model).
• Convenient pack of 2
  Supplied as a pair of blades to fully re‑equip a typical 2‑knife planer cutter block.

Detailed Product Description

DeWalt Heavy Duty Reversible Planer Blades 82mm – Pack of 2 are engineered to withstand the demands of professional site and workshop use. The carbide cutting edges offer a significant step up in wear resistance and lifespan compared with conventional high‑speed steel blades, especially when planing abrasive timbers and board products.

Each blade features a double‑sided, reversible design. When the first edge becomes dull, simply rotate the blade 180° to expose a fresh cutting edge. This reduces downtime, extends usable life and offers excellent value over the life of the blades.

The precision‑ground profile and tight manufacturing tolerances help ensure smooth, consistent planing with minimal tear‑out when fitted and set correctly. These DeWalt 82mm blades are suitable for a wide range of everyday carpentry and joinery tasks, including:

• Planing and sizing softwood and hardwood
• Trimming and fitting doors and frames
• Levelling studs, battens and joists
• Edge planing boards and panels
• Finishing components before installation

The standard 82mm length is widely used across the market, making these blades suitable not only for DeWalt models, but also for many other brands that accept 82mm reversible knives. Always confirm compatibility with your planer’s manual or existing blades before fitting.

Typical Applications & Use Cases

• Door trimming & fitting
  Planing internal and external doors to width and height for a precise fit in frames and linings.
• First fix carpentry
  Straightening and sizing studs, joists, rafters and battens on new build and refurbishment projects.
• Second fix & joinery
  Fine planing of skirting, architrave, window boards, casings and trims for a smooth, paint‑ready finish.
• Workshop & furniture work
  Planing hardwood components and panels in joinery and furniture manufacturing.
• Board preparation
  Cleaning and edge‑truing plywood, MDF, chipboard and other sheet materials before assembly.

Fitting & Usage Guidance

How to Fit DeWalt 82mm Reversible Planer Blades

1. Disconnect the planer
   Unplug the tool or remove the battery before changing blades.
2. Access the cutter block
   Follow the planer manufacturer’s instructions to remove the blade cover/guard and expose the cutter block.
3. Remove old blades
   Loosen the clamping screws or wedge holding the existing blades. Carefully remove the blades, noting their orientation and projection.
4. Clean the blade seats
   Remove resin, dust and debris from the blade pockets and clamp faces so the new blades sit flat and true.
5. Install new blades
   Position each DeWalt 82mm blade in the cutter block with the cutting edge correctly oriented. Set equal projection both sides (or use built‑in location features if provided) and tighten clamping screws evenly.
6. Check clearance & reassemble
   Rotate the cutter block by hand to ensure blades clear the sole plate and body. Refit all covers and safety guards before use.

Best Practice Tips

• Always replace or flip both blades at the same time to maintain balance and cutting quality.
• Take lighter cuts on hardwoods and difficult grain to minimise tear‑out and reduce load on blades and motor.
• Avoid contact with nails, screws, staples and masonry – even carbide edges can chip on hard inclusions.
• Keep the planer base and work surfaces clean and free from grit to reduce premature edge wear.

Key Features & Advantages

• Carbide Cutting Edges
  Feature: Heavy duty carbide‑tipped cutting edges.
  Benefit: Long‑lasting sharpness and excellent resistance to wear on abrasive materials.
• Reversible Double‑Sided Design
  Feature: Two precision cutting edges per blade.
  Benefit: Flip the blade when dull to extend blade life and reduce replacement frequency.
• Precision Ground for Smooth Finish
  Feature: Accurately ground cutting geometry and tolerances.
  Benefit: Produces smooth, consistent surfaces and accurate material removal when properly set.
• Standard 82mm Length
  Feature: Common 82mm format used on many electric hand planers.
  Benefit: Wide compatibility – suitable for DeWalt models and other compatible 82mm planers (check manual).
• Supplied as a Matched Pair
  Feature: Pack of 2 blades.
  Benefit: Everything you need to fully re‑blade a typical 2‑knife cutter block in one pack.

Technical Information

• Brand: DeWalt
• Product Type: Heavy duty reversible planer blades
• Length: 82mm
• Edge Material: Carbide (heavy duty)
• Edge Style: Double‑sided, reversible
• Pack Quantity: 2 blades (pair)
• Compatibility: DeWalt 82mm electric hand planers & other compatible models using 82mm reversible knives (check your planer manual/spec)
• Suitable Materials: Softwood, hardwood, most engineered wood products and sheet materials
• Typical Users: Carpenters, joiners, shopfitters, builders, serious DIY users

DeWalt Heavy Duty Reversible Planer Blades 82mm Pack of 2 Frequently Asked Questions

1. Will these DeWalt 82mm blades fit my planer?

These blades are designed for DeWalt 82mm planers and many other planers that use standard 82mm reversible blades. Check your current blade length and style, or refer to your planer’s manual, before purchasing.

2. What is the advantage of carbide over HSS blades?

Carbide edges offer significantly better wear resistance and edge retention than HSS, particularly on abrasive or engineered materials. They generally stay sharp longer, providing more consistent cutting and fewer blade changes.

3. How do I know when to flip the reversible blades?

Flip the blades when you notice the planer is working harder, leaving a rougher surface or causing more tear‑out. Remove the blades, clean the seats, rotate each blade to the unused edge and refit according to the planer instructions.

4. Can these blades be re‑sharpened?

Carbide blades can be re‑sharpened by specialists with the correct equipment, but many users treat reversible planer blades as consumables and simply replace or flip them. If you choose to re‑sharpen, use a professional sharpening service experienced with carbide tooling.

5. Are these blades suitable for hardwood and engineered boards?

Yes. The heavy duty carbide construction makes them well suited to hardwoods and man‑made boards, where standard HSS blades would typically dull more quickly. For best results, take lighter passes on very dense or interlocked grain.